Is CR2O3 possible

Substance Infocard

This substance is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 10 000 tonnes per annum.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses

This substance is used in the following products: coating products, fillers, putties, plasters, modeling clay, cosmetics and personal care products, finger paints, adhesives and sealants, metals, metal surface treatment products and semiconductors.
Other release to the environment of this substance is likely to occur from: outdoor use, indoor use (eg machine wash liquids / detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), indoor use in close systems with minimal release (eg cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (eg hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).

Article service life

Release to the environment of this substance can occur from industrial use: industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal).
Other release to the environment of this substance is likely to occur from: indoor use in long-life materials with low release rate (eg flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment), outdoor use in long-life materials with low release rate (eg metal, wooden and plastic construction and building materials) and outdoor use in long-life materials with high release rate (eg tires, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)).
This substance can be found in products with material based on: stone, plaster, cement, glass or ceramic (eg dishes, pots / pans, food storage containers, construction and isolation material), plastic (eg food packaging and storage, toys, mobile phones) and metal (e.g. cutlery, pots, toys, jewelery).

Widespread uses by professional workers

This substance is used in the following products: coating products, fillers, putties, plasters, modeling clay, cosmetics and personal care products, finger paints, laboratory chemicals and pH regulators and water treatment products.
This substance is used in the following areas: building & construction work and formulation of mixtures and / or re-packaging.
This substance is used for the manufacture of: mineral products (e.g. plasters, cement), plastic products and chemicals.
Other release to the environment of this substance is likely to occur from: indoor use (eg machine wash liquids / detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use, indoor use in close systems with minimal release (eg cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (eg hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).

Formulation or re-packing

This substance is used in the following products: coating products, fillers, putties, plasters, modeling clay, cosmetics and personal care products, finger paints, pH regulators and water treatment products, inks and toners, non-metal-surface treatment products, metals and metal surface treatment products.
Release to the environment of this substance can occur from industrial use: formulation of mixtures and formulation in materials.

Uses at industrial sites

This substance is used in the following products: coating products, cosmetics and personal care products, fillers, putties, plasters, modeling clay, metals, pH regulators and water treatment products, finger paints, non-metal-surface treatment products and metal surface treatment products.
This substance is used in the following areas: formulation of mixtures and / or re-packaging.
This substance is used for the manufacture of: chemicals, plastic products, mineral products (e.g. plasters, cement), metals, fabricated metal products and machinery and vehicles.
Release to the environment of this substance can occur from industrial use: in the production of articles, of substances in closed systems with minimal release, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid and in processing aids at industrial sites.

Manufacture

Release to the environment of this substance can occur from industrial use: manufacturing of the substance.